Features: - ability
- High Gloss
- High Strength
- Good Tape release
- Good Scuff resistance
- Good Crinkle resistance
After addition of Hardners @ 5% at the time of printing, good alkali resistance and soap resistance is obtained. Hence our A.R inks after addition of Hardners are suitable for detergent pack printing, spices and oil packing. Substrates: -
Can be printed on all types of Polyethylene, Polyproplyene, PVC, PT, MST.
For Polythylene and Polyproplyene film the treatment should be 38 dynes per / cm for good adhesion and optimum resistance properties.
Printability: -
Excellent printability in Half Tone and good coverage in Full Tone.
Free from any printing defects such as streaking and scumming etc.
Excellent rub and scratch resistance.
Diluents: -
The inks have a tolerance with a wide range of solvents to accommodate variation in press speed and conditions.
For Flexo: -
The usual diluent for Flexo inks is a blend of Isopropyl Alcohol and Butyl Alcohol. Ink makers recommendation should be followed in order to get the best printing and optimum drying under various conditions.
For Gravure: -
Recommended diluents is Toluene or blend of Isopropyl Alcohol, Butyl Alcohol is recommended as Retarder.
Colour Range: -
Full range of Pantone basic shades including Metallic and ARSR and Light Fast Shades.
The information in this data sheet has been carefully complied from our experience gained and detailed laboratory testing. However, the product performance and its suitability for the customers purpose depend on the particular condition of use and the material printed. We recommended that the customer satisfy themselves that each product meets their requirement in all respects before commencing a print run. |
