Suitable for printing on Paper such as Craft, Chromo and various Boards.
Substrates: -
Can be printed on various Paper and Board.
Printability: -
• Excellent printability and good coverage
• Free from any printing defects.
Diluents: -
• Aquatone inks can be adusted for viscosity with water depending upon the job, anilax.
• Screen and printing speed, if more 2 to 3% water is nedded, ready made diluent should be used.
• Excessive water for dilution cause foaming
• Accelerator and Retarder are available for special needs
Colour Range: -
Full range of Pantone basic shades including Light Fast Shades.
Grinding :
Less than 0.5 MICRONS
% age Solids : 45 + 2
VISCOSITY : ph 8.8-9.5
10 - 12
Zhan Cup #4 at 25
LIGHT FASTNESS : Fair to good.
OPACITY / TRANSPERACY : Depending on colours to colour.
GLOSS : Good
DRYING TIME : The drying is by absorption at Room temperature
within seconds.
STORAGE & SAFETY :
1. Shake or stir well before using as phase separation may occur overtime.
2. Store used ink separately. Never add or mix used ink to fresh ink for storage.
3. Do not mix with, any other inks.
The information in this data sheet has been carefully complied from our experience
gained and detailed laboratory testing. However, the product performance and its suitability for the customers purpose depend on the particular condition of use and the material printed. We recommended that the customer satisfy themselves that each product meets their requirement in all respects before commencing a print run.
